Propylene Glycol 100% strength. Available in 220kg drum and 23kg pails. Please contact us for current pricing as market fluctuations make it difficult to post competitive pricing.
Propylene Glycol 100% strength. Available in 220kg drum and 23kg pails. Please contact us for current pricing as market fluctuations make it difficult to post competitive pricing.
This product is used as a quick test to check the PH level of water. ph 0 to 2 HCL,Nittric,Sulfuric(Hazard) ph 3 to 5 Mod.Acid,Acetic,Phosphoric (Mild Hazard) ph 6 to 6.5 No real Danger ph 7.0 Neutral ph 8 to 9 Mild Alkaline ph 10 to 12 Strong Alkaline, Amm., Lye ph 12 to 14 Caustic,Strong Alkaline,Lye Hazard to skin and eyes
This boiler treatment satisfies the need for the water contained in a typical vented, outdoor hot water wood furnace. These Sodium Nitrite pucks are able to treat 60 US gallons each. It is recommended that you completely dissolve each puck in a 3 to 5 gallon plastic container. Then pour into the open vent of your boiler as per manufactures instructions. This process is to obtain a 600 to 1000 PPM Sodium Nitrite concentration to protect your boiler.
This product is used as a quick test to check the Nitrite, PH and freeze protection level of your Outdoor Furnace water. The Topline Test Strip 3-1 kit (TTS3-1), comes with 5 individual sealed foil packets each containing a single test strip with three seperate color tabs on the strip and a comparison chart for Nitrite,PH and Freeze Point.All in a UV resealable plastic pouch. This test kit will only read if there is a 5% minimum Glycol present your your boiler water. If you do not have Glycol in your boiler system, you must add Glycol to your test sample to activate the test strip.
